B l u e B o x
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 18 / 96
www.go-sys.de
3.3 Connections BlueBox T4 Basic
3.3.1 Connection Options BlueBox T4 Basic
The BlueBox has the following connection options:
1.
Ground connection
2.
Power supply (24 VDC) via a 4-pin M12 panel plug (male)
3.
CAN-bus connection via a 5-pin M12 panel socket (female)
Connection of BlueBox sensor-/actuator modules via a 4-wire CAN-bus connection cable
4.
USB connection
Please note: The USB port at the BlueBox is designed for data export and for firmware update
1
.
5.
L AN connection for LAN cables in standard or cross-link design (see also
3.5 LAN-connection
)
6.
Serial interface connection via a 3-pin M8 panel plug (male), RS-232 or RS-485, the selection is set
with the associated jumpers
2
7.
Current output 1 connection via a 4-pin M8 panel socket (female), 4 to 20 mA
8.
Current output 2 connection via a 4-pin M8 panel socket (female), 4 to 20 mA
9.
Borehole (with cap) for an antenna or cable modem
Modems (optional):
HSPA/LTE modem with antenna
ISDN modem
Analogue modem
1
Details on request from GO Systemelektronik
2
see
3.8 Jumper Position RS-232/RS-485 and RS-485 Termination at the BlueBox
2
3
4
5
6
1
7 8
9
