B l u e B o x – M e n u O p e r a t i o n
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 57 / 96
www.go-sys.de
8.2.1.4.1 Modem Port Setup
Modem menu / Modem Settings 8.2.1.4
The buttons are also status indicators.
Enables or disables the modem connection.
If a factory-mounted modem is connected to the serial interface, then this inter-
face is activated by the manufacturer.
If a factory-mounted modem is connected to the USB interface, then the USB in-
terface is activated for the modem by the manufacturer via this button.
Switches back to the Modem menu / Modem Settings.
8.2.1.4.2 Input of the Modem PIN number
Modem menu 8.2.1.4
Note on a possible operation error:
It is necessary to change the PIN number before installing or acti-
vating a new UMTS card, otherwise the UMTS card will be deactivated by repeated queries by default.
The current setting is displayed.
The PIN number is entered using the numeric keys.
Deletes the last entered character.
Saves the input and switches back to the Modem menu.
Switches back to the Modem menu without saving the input.
Port
Setup modem port
<–
OFF
Serial 1
USB 1
OFF
OFF
Serial 1
Serial 1
USB 1
USB 1
<–
PIN
Modem PIN
1
2
3
4
5
6
7
0
8
9
<
<–
Ok
<
Ok
<–
