B l u e B o x – M e n u O p e r a t i o n
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 35 / 96
www.go-sys.de
8.1.3 Parameter Display 8-way (Tiles)
Only appears at a BlueBox with a colour display.
Here, as an example, the parameter display with more than 8 sensors/actuators.
The first 8 elements are displayed for 6 s, the order is alphabetical
∗
. Thereafter the display cycles to the display
of the next elements.
In the upper left corner you see the page number of the current display and the number of pages (in this case 1/2).
The sensors/actuators are shown as tiles.
Status messages are not displayed, but are marked in colour.
see
Appendix J – Status Messages
•
Time of day of the measurement value
•
Numerical value of the measurement value
•
Unit of the measurement value
•
Sensor name
Buttons
Switches to the display of the previous sensors/actuators.
Switches the cycling of the parameter display off.
Switches to the display of the next sensors/actuators.
Switches the cycling of the parameter display off.
Switches the cycling of the parameter display on and off.
The button is also a status indicator.
In the maintenance service mode this button appears, it calls up the
maintenance service menu. see 8.2.4 Service Mode (Maintenance)
At current user-defined error messages, this button appears. see
8.1 Parameter Display
Switches to the Main menu.
∗
The sequence is that of the ASCII numeric value, i. e.: Special characters
numbers
capital letters
lower case letters
1/2
10:15:00
11
pH
pH value 01
10:15:00
8
pH
pH value 02
10:15:00
10
mg/l
oxygen
10:16:30
18
°C
temperature in
10:16:30
22
°C
temperature out
10:16:30
0.05
NTU
turbidity
10:14:20
1006.91
hPa
air pressure
10:14:20
39.8
%
humidity
M enu
S er vi ce
yellow
Status: 0
10:15:00
10
mg/l
Oxygen
orange
Status:
4, 50, 51
10:15:00
-14
C°
Tempdiff.
red
Status:
all others
10:15:00
0
mg/l
Oxygen
S er vi ce
M enu
Selection via
8.2.1.6 Display
