B l u e B o x
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 2 / 96
www.go-sys.de
Copyright
This manual contains information which is the intellectual property of GO Systemelektronik GmbH.
The user is obliged to use this information exclusively to run the instrument. It is not permitted to pass this
information to third parties. Reproducing, copying, editing or extracting the manual contents is only allowed
with the express permission of GO Systemelektronik GmbH.
Changes
GO Systemelektronik GmbH retains the right to modify the contents of the manual without prior notice.
Liability exclusion
GO Systemelektronik GmbH takes no responsibility for correct system operation under all possible operating
conditions. It is not possible to guarantee that the software will function completely without error under all
possible circumstances. GO Systemelektronik GmbH cannot therefore accept liability for direct or indirect
damage resulting from system operation or the contents of this manual.
Product observance
Within the scope of our obligation for product observance GO Systemelektronik GmbH will endeavour to warn
third parties about all identified dangers which could arise from the interaction between hardware and soft-
ware and from the use of other components. Effective product observance is only possible with adequate
information from the end user about the planned field of application and the hardware and software used. If
the conditions of use change or if the hardware or software are changed, due to the complex relationships
between hardware and software it is no longer possible to describe all possible dangers and their effects on
the total system, in particular on our system. This manual does not describe every possible property and
combination of the system. For further information, please contact GO Systemelektronik GmbH.
Manufacturer’s declaration
When installing the system it is necessary to ensure correct electrical connection, protection against moisture
and foreign bodies and excessive condensation, and system heating which can arise from both correct and
incorrect use. It is the responsibility of the installer to ensure that the correct installation conditions are pro-
vided.
© GO Systemelektronik GmbH
Faluner Weg 1
24109 Kiel
Allemagne
Tel.: +49 431 58080-0
Fax: +49 431 58080-11
www.go-sys.de
Creation date: 19.3.2019
Described firmware version: 4.02.06
Version of this manual: 2.21 en
Article number of this manual: DOC 486 000X-E-2.21-BDA
File name: DOC 486 000X-E-2.21-BDA Manual BlueBox T4.pdf
