B l u e B o x – M e n u O p e r a t i o n
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 63 / 96
www.go-sys.de
8.2.1.6 Display
System menu 8.2.1
Pressing a point on the
Active Brightness
or
Passive Brightness
bar sets the display backlight value accordingly.
At user inactivity, the software switches the backlighting of the display after 150 seconds from the value set
under
Active Brightness
to the value set under
Passive Brightness
. At user activity, the brightness switches back
to the value set under
Active Brightness
.
At a high temperature of the CPU, the value set under
Passive Brightness
is ignored and the display back-
lighting is switched off.
Switches back and forth between the
•
Parameter display 8-way
1
•
Parameter display 6-way
•
Parameter display single
see
8.1 Parameter display
The button is also a status indicator.
Defines which sensors/actuators
2
will be displayed in the multi-
ple parameter display (see 8.1.2 Multiple parameter display).
The button is also a status indicator.
There are three possibilities:
•
Only selected sensors and actuators are displayed. Selection
via 8.2.2.1 Measurement value menu/Sensor menu and
8.2.3.1
Actuator menu
•
All sensors and all actuators are displayed.
•
All sensors are displayed.
Switches back to the System menu.
1
Appears only at a BlueBox with a colour display.
2
The status of an actuators can also be understood as a measurement value.
Display
09:19:39
10.07.17
<–
Display
Act. brightness
Pass. brightness
Display with 6 sensors
Display selected sensors
Display with 6 sensors
Display with 1 sensor
Display with 8 sensors
Display sensors and actuators
Display selected sensors
Display all sensors
<–
