Normal Pattern Sewing Computerized Control System for Square Buttonhole Machine
32
4.9
Sewing Shape Selection
Press
to enter the interface for selecting the
sewing shape
①
Select the 1
st
bar-tacking
There are five common 1
st
bar-tacking shapes,
which are Square Type, Radial Type, Eyelet Type,
Semi-lunar Type and the Round Type. When the
parameter K04 is set to 30, another 4 types of
bar-tacking section can be used, which are
bar-tacking section sewing, bar-tacking with left
cut, bar-tacking with right cut and bar-tacking with
center cut. Select the 1st bar-tacking section to
enter the interface for selecting the shape. For the
pattern from No.27 ~No.30, the user can press
to end the selection
Press
to quit directly.
Note
：
1. The display of 1
st
bar-tacking section is
affected by parameter K04
；
2
．
When changing the 1
st
bar-tacking section,
user has to change the sewing parameters
of the relating shape. Otherwise, it may
affect the data at pattern-designing or the
sewing effect
；
3
．
For the default parameter value of the
shape, please refer to 10.4 “Sewing
Default Value List” in Appendix 1
