Mode Setting Computerized Control System for Square Buttonhole Machine
74
7.2
Level 1 Parameter Setting
①
Set Parameter
Select
to enter the interface of Level 1 parameter
setting (shown as the figure at right).
Press
to quit the setting interface
When some parameters are changed, the system will
display the “Modified” in the parameter setting
interface.
Select the parameter for changing; Then the system will
enter the setting status. The parameters are separated as
“Data Input Type” and “Selection Type”. Please refer to
the example at below:
Select U01 and enter the interface below
Select U19 and enter the interface below:
