Safety Matters for Attention Computerized Control System for Square Buttonhole Machine
Grounding is a must. If the grounding cable is not fixed, it may cause the electric-shock and mis-operation
of machine
The entire cables shall be fixed with a distance at 25mm away from the moving component at least. By the
way, don’t excessively bend or tightly fixed the cable with nails or clamps, or it may cause the fire or
electric shock.
Please attach the safety cover at the head.
Sewing
This sewing machine can only be used by the trained staff.
This sewing machine has no other usages but the sewing.
When operating the sewing machine, please remember to put on the glasses. Otherwise, the broken needle
will cause the personal injury.
At following circumstances, please cut off the power at once so as to avoid the personal injury caused by
the mis-operation of start switch: 1. Threading; 2. Replacement of needles; 3. The sewing machine is left
unused or beyond supervision
At working, don’t touch or lean anything on the moving components, because both of the above behaviors
will cause the personal injury or the damage to the sewing machine
During working, if the mis-operation happens or the abnormal noise or smell is found at the sewing
machine, user shall cut off the power at once, and then contact the trained technicians or the supplier of
that machine for solution.
For any trouble, please contact the trained technicians or the supplier of that machine.
Maintenance & Inspection
Only can the trained technicians perform the repair, maintenance and inspection of this sewing machine.
For the repair, maintenance and inspection of the electrical component, please contact the professionals at
the manufacturer of control system in time.
At following circumstances, please cut off the power and pull off the plug so as to avoid the personal injury
caused by the mis-operation of start switch:
1.Repair, adjustment and inspection ;
2. Replacement of the consumptive devices, like needle, knife and so on.
Before checking, adjusting and repair any air-driven equipment, user needs cut off the source of gas
and wait for the pressure indicator drop to “0”.
If you have to adjust the machine when the power is on, you can’t be too careful at following the entire
Safety Matters for Attention
If the sewing machine damages due to the unauthorized modification, our company will not be responsible
for it.
