Information Computerized Control System for Square Buttonhole Machine
108
•
Needle Replacement
：
M031
• Oil Replacement Time
：
M032
• Cleaning Time
：
M033
9.4
Information of Production Control
In the production control interface, the system can display the number of production from the start to present and
the target number of production, as long as, receiving the start order. There are two ways to enter the interface of
production control as below:
：
z
Via Information Interface
z
Via Sewing Interface
9.4.1
Via Information Interface
①
Display of information interface
Press the Information Key (A) locating at the
switch part in the data input interface, then the
system will display the information interface.
② D
isplay of production control interface
Press the production control interface display key
(B) in the information interface to enter the
interface of production control (as shown in right
figure).
