Information Computerized Control System for Square Buttonhole Machine
112
⑤
Start to count number of production pieces
Press
(I); then the
【
Final Target Value
】
,
【
Existing Target Value
】
and
【
Actual Result Value
】
will go dark and the system will start counting the
number of the production pieces.
Final Target Value
：
can be used as the reference of
time
Existing Target Value:
According to the set
value at Pitch Time of Target, the machine begin
timing and add one to this value after a set time pitch
Actual Result Value
：
When entering via “9.4.2 Via
Sewing Interface”, the Actual Result Value will start
counting according to the value set at
【
Unit Interval of
Actual
】
and add one to this value at each finish of a
piece
By setting the Existing Target Value and the
Actual Result Value, user can find out whether the
productivity of one piece is increased or decreased.
⑥
Stop counting
Under the counting status, the Stop Key
is
displayed. Press the Stop Key
to stop counting.
After the counter stops, the Counting Key
is
displayed at the position of the Stop Key. If needing to
continue counting, please press the Counting Key
.
The counted value will not be cleared until the Clear
Key
is pressed.
Press
to quit directly
