30
A/C SYSTEMS PREVENTIVE MAINTENANCE SCHEDULE
If your vehicle is equipped with an A/C system, please find below the recommendations
from the manufacturers. Some of these points can be inspected by your regular
mechanic. However, make sure to visit an A/C repair center to perform all other
inspections and maintenance.
** Always remember that while your vehicle is covered by warranty, your Micro
Bird dealer needs to be contacted first to obtain guidance or pre-authorization.
Daily pre-trip inspection and maintenance:
Check for sufficient air flow at evaporator air outlet. If air flow is less than usual,
inspect return air filter.
Check set point temperature on digital thermostat to ensure proper cooling.
Confirm all evaporator and condenser fans are operating.
Check for water dripping from the evaporator or air ducts.
Check for unusual noises at the engine, evaporator and condenser.
Check tension and condition of drive belts.
Weekly inspections:
Perform daily inspection.
Check condenser, evaporator coils and return air filters for cleanliness, clean if
necessary.
Monthly inspections:
Perform weekly inspection.
Run system for 5 minutes and check battery voltage.
Clean or replaced evaporator return air filters.
Inspect refrigerant hoses and fitting connections.
Inspect electrical harness and connections.
Quarterly inspections:
Perform monthly inspection.
Check and clean evaporator and condenser coil and fins.
Check blower operation.
Inspect all components including evaporator and condenser motors.
Check hoses, underhood harness as well as those under vehicle for proper support and
protection.
Check evaporator drain lines.
Make sure all compressor mounting brackets and hardware are tight.
