Girardin Blue Bird Micro Bird 2014 Operation And Maintenance Manual Download

Page: 11 / 56

Depending on the customer needs and states requirements, some school busses will be
equipped with more switches. Here are other switches that can be found on the console.



/ STROBE LAMP:

Activation of the strobe light located on the roof.



STROBE ON

: Indicator showing strobe lamp is flashing.



X-ARM:

This switch is used to cancel the crossing arm while school lights are

activated and this option is not needed.



STEP DE-ICER:

Activates an electric de-icer system located on the lower step of

the entrance door.



ROOF FAN:

Activates the electric fan of the roof hatch or the electric static vent to

control the moisture and help air circulation in the vehicle.



HIGH / LOW

Activates the

two speed windshield electric fan located in

the driver’s area.



/ FAST IDLE:

Motor’s revolution control system to increase the slow idle time

and helps maintain the battery charge. Available on Ford chassis only.



HEATER VALVE:

This switch controls the electric heater valve installed

underneath the bus.



EMER. EXIT:

Pilot light indicates if the rear emergency door or any push out

windows are not securely latched.



DOOR LOCKED:

The pilot light will warn the driver that the rear emergency door

is locked thus preventing the engine from starting.



NOISE SUPP:

This switch will turn off the accessories that could make noise

while approaching a railroad track. (Example: Heater, A/C, Fan, and Radio)



LIFT DOOR:

The pilot light will be activated if the lift door is not securely closed

thus preventing the transmission to be changed from park to drive. Depending on the
option chosen, a red light or a pilot light will be installed.

Summary of Contents for Blue Bird Micro Bird 2014

























































Search results

Summary of Contents for Blue Bird Micro Bird 2014

Reviews:

Related manuals for Blue Bird Micro Bird 2014

Brands by name

Popular brands

Girardin Blue Bird Micro Bird 2014, Operation And Maintenance Manual

Search results

Summary of Contents for Blue Bird Micro Bird 2014

Reviews:

Related manuals for Blue Bird Micro Bird 2014

Brands by name

Popular brands