10
STOP ARM AND CROSSING ARM
To activate the stop arm or the crossing arm, the warning lights must first be activated by
the start switch and the entrance door must be opened. If you have a master switch, first
press the master and then the start switch.
To deactivate the stop arm or the crossing arm, simply close the passenger entrance door.
If your bus is equipped with an x-arm switch, you can deactivate the crossing arm when
the 8 way lights have been activated if the crossing arm is not required.
Some crossing arms will have a magnet keeping the yellow rod securely fixed to the
bumper. If you should have an issue with this special type of arm, please refer to the
troubleshooting guide on pages 41-42 of this manual.
