manualshive.com logo in svg

Girardin Blue Bird Micro Bird 2014, Operation And Maintenance Manual

The Girardin Blue Bird Micro Bird 2014 is a reliable and efficient vehicle designed to meet all your transportation needs. To ensure its optimal performance, make sure to refer to the Operation and Maintenance Manual. This comprehensive manual is available for free download from manualshive.com, providing you with essential information for the upkeep and longevity of your vehicle.

Share
Download
background image

 
 

 

14

 

WINDOWS 

 

                       

     

 

 

Passenger  windows  are  split-sash  type.  They  can  be  opened  or  closed  by  releasing  the 
plungers located at each side of the top window frame.  When closing, both sides of the 
upper 

bar needs to be pushed in an upward movement to touch the top window frame and 

allow  the  side  latches  to  engage  correctly  in  the  cavities  on  each  side  of  the  window 
frame rails.   
 
Push-out windows:  These windows are located each sides of the bus.  Their location is 
clearly identified by an “EMERGENCY EXIT” sticker directly in the window.  To use, 
lift the handle to unlock and push window outward.  
 
Note:  Some states will require a certain window opening.  To achieve this, some window 
bumpers are installed outside the bottom window to stop the course of the top window.  If 
the window does not open fully, do not use force to push window down. 
 

Please refer to the troubleshooting guide on pages 43-44 of this manual for repair tips.   
 

         
 
 
 
 
 

 
 
 
 
 
 
 
 
 

Latch and 
plunger 

Summary of Contents for Blue Bird Micro Bird 2014

























































Reviews:

No comments

Related manuals for Blue Bird Micro Bird 2014

Brands by name

Popular brands

Load more brands