manualshive.com logo in svg

Girardin Blue Bird Micro Bird 2014, Operation And Maintenance Manual

The Girardin Blue Bird Micro Bird 2014 is a reliable and efficient vehicle designed to meet all your transportation needs. To ensure its optimal performance, make sure to refer to the Operation and Maintenance Manual. This comprehensive manual is available for free download from manualshive.com, providing you with essential information for the upkeep and longevity of your vehicle.

Share
Download
background image

 
 

 

22

 

MISCELLANEOUS ACCESSORIES 

 

Back up alarm 

 

 

 
Back up camera 
 

  

   

 
 
 
Battery box 
 

The optional skirt mounted battery box is designed to install chassis battery or batteries in 
a side skirt mounted compartment.  The batteries are mounted on a standard sliding tray 
or on ball bearings when required by state specification standards. 
 

  

  

 

 
This  compartment  can  hold  two  batteries,  one  behind  the  other.    If  only  one  battery  is 
present, it will be installed at the rear of the sliding tray.  To slide tray out, raise latching 
handle up and pull tray towards you. 
 
Note:  Make sure the latch is correctly inserted and will not allow tray to slide out before 
closing the battery box door. 

 

 

 
A locked battery box could be installed on the side of the bus. This compartment will not 
have any sliding tray nor any battery as this box will serve as exterior storage space.  
 

The back-up  alarm  is  located on the frame of the bus  behind  the rear 
wheels

. 

Two  kinds  of  back  up  cameras  are  available  in 
Micro Bird busses. If you have such equipment, it 
will  either  be  a  black  screen  in  the  dash  or  an 
integrated  back  up  camera  inside  the  rear  view 
mirror  of  the  chassis.  If  you  should  have  issues 
with  these,  as  they  are  aftermarket  installations, 
please contact your dealer for help.  

 

Back-up camera 

Summary of Contents for Blue Bird Micro Bird 2014

























































Reviews:

No comments

Related manuals for Blue Bird Micro Bird 2014

Brands by name

Popular brands

Load more brands