Girardin Blue Bird Micro Bird 2014 Operation And Maintenance Manual Download | Manualshive

Page: 20 / 56

background image

15

CLIMATE SYSTEMS

A/C SYSTEMS

The A/C buttons are located on the console and control the rear air conditioning system.
When vehicle is equipped with MCC systems, the left button is for the power setting and
the right one is for temperature control. Those with ACC systems will only have one
button for the power setting.

For reference, the quantity of oil and refrigerant are mentioned on an AC sticker behind
the electrical compartment’s door.  These quantities include the chassis portion when the
system  is  a  tie-in.    The  same  quantity  will  be  written  on  an  underhood  sticker  near  the
motor.  When  the  system  is  an  add-on  with  its  separate  compressor,  the  quantities
mentioned on the electrical compartment’s door will only show the content of the add-on
system and the underhood sticker will indicate the chassis quantity only.

For reference purposes, there are many kinds of evaporator: ceiling, side, front and rear.
You can also find types of condensers: Roof top and skirt mounted.

Please refer to the A/C system preventive maintenance schedule on pages 30-31 of this
manual for warranty repair instructions.

MCC

ACC

Ceiling evaporator

Skirt condenser

You can also find a sticker with the belt routing of the AC system
under the hood. When a tie in system is installed, we need to
replace the belt by a longer one. The belt part number will also be
written on this sticker.

«
...
18
19
20
21
22
...
»

Summary of Contents for Blue Bird Micro Bird 2014

























































Reviews:

No comments

Related manuals for Blue Bird Micro Bird 2014

Brand: IC Bus Pages: 239

Gasoline CE Series

Brand: IC Bus Pages: 241

Brand: IC Bus Pages: 287

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands