manualshive.com logo in svg

Girardin Blue Bird Micro Bird 2014, Operation And Maintenance Manual

The Girardin Blue Bird Micro Bird 2014 is a reliable and efficient vehicle designed to meet all your transportation needs. To ensure its optimal performance, make sure to refer to the Operation and Maintenance Manual. This comprehensive manual is available for free download from manualshive.com, providing you with essential information for the upkeep and longevity of your vehicle.

Share
Download
background image

 
 

 

13

 

REAR EMERGENCY DOOR 
 

    

 

 

To open the rear door from outside, simply rotate the handle counter clockwise.  To open 
the rear door from inside, simply lift red handle clockwise. 
             

 

 
The rear door is equipped with a telescopic retainer.  This mechanism locks the door in 
the open position at 100 degrees.  The mechanism is located on the upper interior portion 
of the door.   
 

** ATTENTION:  To release mechanism, open the door past the locking point and 
close.  Failure to unlock mechanism before closing the door will break the telescopic 
retainer. 
 
 

 

Summary of Contents for Blue Bird Micro Bird 2014

























































Reviews:

No comments

Related manuals for Blue Bird Micro Bird 2014

Brands by name

Popular brands

Load more brands