Girardin Blue Bird Micro Bird 2014 Operation And Maintenance Manual Download | Manualshive

Page: 14 / 56

background image

9

MIRRORS (INTERIOR AND EXTERIOR)

Interior mirrors:

Located above the driver, a rearview mirror will allow a quick look at the passengers
without turning around.

Some vehicles do not have the original OEM rearview mirror which is replaced by a
special rearview mirror with an integrated back up camera.

Exterior mirrors:

The  outside  rearview  mirrors  are  designed  to  provide  the  seated  driver  a  view  of  the
roadway to the rear and to the sides of the bus.

The  elliptical  crossview  mirrors  are  designed  to  allow  a  seated  driver  to  view  all  areas
around the front of the bus not otherwise visible.  The crossview mirrors are designed to
be  used  to  view  pedestrian  while  the  bus  is  stopped.

They must not be used to view

traffic while the bus is moving. Image, road vibrations and shape of mirror will give
a distorted image and would not accurately show another vehicle location.

As the busses can be used by different drivers, these mirrors should be verified and
adjusted each morning if needed, to make sure the driver has a clear view of these areas.

The heated mirrors are controlled by a switch in the console and the remote mirrors are
controlled by 2 movable buttons above driver.

Rearview
mirrors

Elliptical
crossview
mirrors

Remote mirror control:
A

llows the driver to adjust

the exterior mirror
positions.

Heated mirror defrost
switch: A

llows the

driver to activate heat
in mirrors.

Passenger
mirror

Rear view mirror with
integrated back up camera

«
...
12
13
14
15
16
...
»

Summary of Contents for Blue Bird Micro Bird 2014

























































Reviews:

No comments

Related manuals for Blue Bird Micro Bird 2014

Brand: Festo Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands