26
Remote Retract All
Model GC 135-I (Transmitter)
The model
GC 135-I
Remote Retract is a control unit designed to send a “Retract All” signal to the Awning
Receivers of the system. It is normally mounted under the dashboard of the vehicle on a switched 12VDC circuit
that powers the unit: every time that the power is turned on the GC 135-I will cause all of the awnings that have
been programmed to retract.
Fig. 1
The three Dip Switches of the
GC 135-I
(Fig.1) determine its mode of operation. The diagram in Fig. 2. Shows the
Dip Switches set as 1-ON / 2-ON / 3-OFF (The white square shows the position of the switch!). The proper settings
for the
GC 135-I
are as shown in Fig. 2. The function of switch 1 is to turn on the power to the transmitter and this is
shipped in the “off” position to preserve the battery state. Power will be applied after installation during the
programming step.
Fig. 2
ON
1 2 3
