18
Note:
This Unit has an optional connector to control Led Light (On/Off) for the Awning. (See picture 4). To open
the controller box and have access to the connector grasp and squeeze the lid along the top and bottom edges.
In order to control the optional LED’s there is a special Hand Held Remote Control, the part number is: 98GC1029
(Five Channels).
The GC-732G must be installed on a fuse protected circuit (15A).
To install:
1.
Select a convenient location inside the vehicle
2.
Bring the 12VDC power and DC motor wires to this location
3.
Connect the power to the input wires (Red = +12VDC, Black = -12VDC)
4.
Connect the motor wires (Blue and Brown) to the motor using quick connectors.
5.
Test operation using the IN and OUT red switches: If the rotation of the awning is not in the desired
direction move the black Reverse Switch to the opposite direction (See picture 3).
Picture 3
Picture 4