17
DC Motor Control (with optional LED Controller)
Model GC 732G (Receiver)
Figure 1
The
GC 732G
Motor Controls is used to control DC motors with Current requirements up to 10A.
The unit operates with all G-Link controls and is housed in a small box and the unit comes with a mounting bracket.
See Picture 1.
All connections are made with wires that can be terminated with the 12V Molex connectors without the need for a
junction box. The wires consist of:
•
8 pin Connector for the two wires (Blue and Brown) for connecting the DC motor(see Picture 2 Below)
•
4 pin Connector for the two wires (Black [-] and Red [+]) for connecting the 12 VDC power source (see
Picture 2 Below).
The white wire on the side is the RF receiver antenna and may be either left loose or attached to a surface using tape.
Picture 2
