-6-
19
Down: shift cursor backward/downward
20
Display: shift LCD display modes
21
Waveform Freeze: freeze the current displayed waveform.
22
ECG Lead Selection: select ECG leads among I, II, III, aVR, aVL, aVF and V.
23
:
AC Power indicator
24
:
DC Power indicator
AC Power
indicator
DC Power indicator
Descriptions
ON (green)
ON (green)
this device is using mains power supply
ON (green)
ON (orange)
this device is using mains power supply
and the battery is being recharged.
OFF
ON (green)
the battery is being used
OFF
ON (orange, blinking)
the battery is being used, but battery
voltage is low, the beeper also gives
warning.
Status
ON (green)
OFF
the battery is being recharged while the
device is off
25
:
Power button: Press power button for 3 seconds to start the monitor or shut off the
monitor.
Note:
Short time pressing power button for entering the Power Saving Mode screen, then
according to your need to make the device stay in the power saving mode or exit from power
saving mode (this function is optional and needs hardware support).
26
SpO
2
:
SpO
2
sensor connector
27
NIBP:
NIBP hose connector
28 TEMP:
TEMP probe connector
29 ECG:
ECG cable connector
3.1.2 Side Panel
The built-in thermal printer is in the left panel. It is easy for user to print waveform and data.