-17-
prompt info area contains 3 segment of information: status or event indication at the left, patient ID
number in the middle, real time clock at the right (also see Figure 4.1).
4.1.1 Default Display Screen Description
Title area:
1
ECG lead status and ECG waveform scale.
“ECG”:
indicate the current monitoring parameter is ECG.
“36.8 ”:
temperature numerical value
Main display area:
When ECG leads is attached on the patient and connected to the monitor well, ECG
waveform will be displayed in the main display area.
Prompt Info:
Status or event indication segment:
This segment will display the ECG leads status, probe status, alarm silence
counting-down timer, automatic NIBP measurement counting-down timer, over limit
warning and other error messages for technical warning. If more than one event occurs or
more status appears, the indication message will be displayed alternately at this segment.
“NIBP C-D: XXX”:
the counting-down timer of NIBP measurement is XXX seconds. This
prompt message appears only when the NIBP measuring mode is set as “AUTO X”.
“mute C-D: XXX”:
the counting-down timer of alarm silence is XXX seconds. This prompt
message appears only when the alarm silence is enabled.
Patient ID segment:
“03”:
Patient ID number.
Real time clock segment:
“11:30:25”:
the current time.
4.1.2 Operation Instructions
“
” key:
select ECG lead. When ECG is monitored, press this key to switch the ECG
lead among
,
,
, aVR, aVL, aVF and V.
“
” key:
freeze ECG waveform or Plethysmogram on the screen.
“
” key:
shift display mode.
“
” key:
print ECG waveform. Press it again to stop printing.
“
” key:
start/cancel NIBP measurement.