-12-
Do NOT bind NIBP cuff on limbs with transfusion tube or intubations or skin lesion
area, otherwise, damages may be caused to the limbs.
Prior to use of the cuff, empty the cuff until there is no residual air inside it to ensure
accurate measurement.
Do NOT twist the cuff tube or put heavy things on it.
When unplugging the cuff, hold the head of the connector and pull it out.
3.3.3 SpO
2
Sensor Connection
SpO
2
sensor is a very delicate part. Please follow the steps and procedures in operating it. Failure
to operate it correctly can cause damage to the SpO
2
sensor.
Operation procedure:
1. Connect the SpO
2
sensor to the connector labeled “SpO
2
”.
When unplugging the
probe, be sure to hold the head of the connector and pull it out.
2. If the finger clip SpO
2
sensor is used, insert one finger into the sensor (index finger,
middle finger or ring finger with short nail length) as shown in the figure below.
Figure 3.5 Finger clip SpO
2
sensor placement
3. If the neonate SpO
2
sensor is used, please follow Figure 3.6 to connect.
Figure 3. 6 Neonate SpO
2
sensor placement
Y type sensor
Sensor adapter: wrapper