-23-
4.5.2 SpO
2
Setup
Figure 4.9 SpO
2
Setup Screen
Screen Description:
“SpO
2
”:
SpO
2
alarm switch; “
” indicates SpO
2
alarm is on; “
” indicates SpO
2
alarm
is off.
“SpO
2
Hi”:
high limit of SpO
2
alarm; range: “1~100”.
“SpO
2
Lo”:
low limit of SpO
2
alarm; range: “0~99”.
“PR
”:
pulse rate alarm switch; “
” indicates PR alarm is on; “
” indicates PR
alarm
is off.
“PR Hi”:
high limit of PR
alarm; range: “22~250”.
“PR Lo”:
low limit of SpO
2
alarm; range: “0~248”.
“PI display”:
“on” means PI display is enabled; “off”
means PI display is disabled.
Operation Instructions
1.
Press “
” key or “
” key to move cursor to select parameter.
2. Press “
” key to confirm and active this parameter setting.
3. Press “
” key or “
” again to adjust or modify parameter value.
4. Press “
”key again to confirm and save the setting.
5. Press
“
” key to return to upper level screen.