-II-
Instructions to User
Dear Users,
Thank you very much for purchasing our product. Please read the following
information very carefully before using this device.
Read these instructions carefully before using this monitor. These instructions
describe the operating procedures to be followed strictly. Failure to follow these
instructions can cause monitoring abnormity, equipment damage and personal
injury. The manufacturer is NOT responsible for the safety, reliability and
performance issues and any monitoring abnormality, personal injury and
equipment damage due to user’s negligence of the operation instructions. The
manufacturer’s warranty service does not cover such faults.
Do not use this device in an environment with ignitable or inflammable gas.
Do not place the monitor in any position that may cause it to fall on the
patient.
Check the safety and performance of this monitor every time before using
it to ensure it works normally and safely
Ensure the monitor is grounded reliably before using it, if the integrity of
grounding connection is in doubt, the monitor should work by using the
built-in battery.
Equipment connected with this monitor should be IEC 60601-1 complied.
Turn off the monitor and take away the sensors from the patient during
MRI scanning. Otherwise it may cause burn to the patient and the quality
of MRI image or the measurement accuracy of the monitor may be
affected.
Although biocompatibility tests had been done to all the applied parts,
some exceptional allergic patients may still have anaphylaxis. Do NOT
apply to those who suffer from anaphylaxis.
All the cables and hoses of the applied parts should be kept away from the
patient’s neck to prevent any possible choke of the patient.
All the parts of the monitor should NOT be replaced at will. If necessary,
please use the components provided by the manufacturer or those of the
same model and standards as the accessories along with the monitor
which are provided by the same factory, otherwise negative effects
concerning safety and biocompatibility, etc. may be caused.
If the monitor falls off accidentally, please do NOT operate it until its safety
and performance have been carefully tested and positive testing results