25
CMS
The Server IP is fixed "202.114.4.119". Once the monitor specifies the port number, the program will automatically
obtain the local IP address and the port to be connected.
CUSTOM
In this mode, the IP address and subnet mask of the server, as well as the two items of this monitor can be set
by user.
l
LAN CARD SET: 3G/WIRELESS/WIRE
3G
The 3G network is mainly used to connect with the central monitoring system through the Internet WAN.
After selecting 3G network, restart the device, then the device will automatically obtain the WAN support (dynamic ip,
DNS, etc.) from 3G card and its driver.
NOTE:
l
The 3G mode is available only when the "NET TYPE" is "CUSTOM". If the monitor is connected to
central station, the central station software need to be installed on a server with fixed IP address, this
address shall be set in the "SERVER IP".
WIRELESS
After selecting wireless network, click "SELECT ROUTE" in "NET CONFIG" menu, then click "SEARCH ROUTES".
All searched routers will be listed on the screen, you can select one of them to connect as your need. If you choose a
router set with secure connection, a dialog box will pop up for you to enter the password.
When the network type is CMS, just make sure the connection between the device and the wireless router is successful.
(The IP address of the server is 202.114.4.119, the IP address of this monitor and subnet mask are generated by the port
number.)
When the network type is CUSTOM, if DHCP service is used, the device will automatically obtain the network support