C
ON
F
IG
U
R
A
TI
ON
20
CONFIGURATION
|
PIPETMAN® M
Chapter 13
CONFIGURATION
Enter the menu using the mode button. You will find not
only the pipetting programs and the speed control, but
also the menu
CONFIGURATION
, including
SERVICE
and
ADJUSTMENT
(refer to Chapter 14
below).
The navigation of the menus is always done in the same
way — make your selection by rotating the push button and
then enter and confirm with a click.
The
Configuration
menu allows you to set up the following items:
●
Volume limit:
Here you can fix the maximal volume of the
pipette (by default = nominal volume). For example, you
have a P200M pipette, but you would like to use it with
your PIPETMAN Diamond Filter Tips DF100, you can set
the maximal
volume at 100 µL and you won’t risk contamination of your pipette.
●
Beeper:
You can switch the tone of your pipette on or off.
●
Contrast:
You can choose a value of 1 to 5 to set up the contrast of the screen.
●
Service:
refer to Chapter 14
below
Adjustment:
refer to Chapter 14
below.
●
Language:
Available from the firmware version 1.20.
Languages available are English, Chinese and Japanese.
To change the language, enter in the
Configuration
menu:
1.
Select your language by turning the push button.
2. Click on the push button to confirm your selection.
The language selected is blinking.
3. Press and hold the Mode button for two seconds to confirm your selection.
Mode button
Push button
Chapter 14
MAINTENANCE
PIPETMAN M requires very little maintenance. However, to ensure pipette accuracy,
precision, and robustness please proceed periodically with a two–minute inspection as
recommended by Gilson.
Your PIPETMAN M allows you to:
●
Get service information.
●
Readjust the pipette to user settings.
●
Return to factory settings.
