G
OO
D
L
A
B
O
R
A
TO
R
Y
P
R
A
C
TICE
F
E
A
TU
R
E
S
17
PIPETMAN® M
|
USER’S GUIDE
To remove a tip ejector extension (see opposite):
1.
Hold the pipette in one hand and grip the extension with the other.
2. Gently twist the extension (either direction) and pull it away
from the pipette.
Personal Label – Name and/or
Application Tag
Your PIPETMAN M offers you two options to mark your pipette.
You can personalize your pipette with a name tag and/or an application tag:
Window Tag:
1.
Remove the window by inserting a small
screwdriver in the access slot.
2. Position the name tag on the pipette.
3. Clip the window back in place.
Clip Tag:
1.
Pull off the clip.
2. Position the name tag into the clip.
3. Clamp the clip back in place.
Short
tips
Long
tips
Window tag
Clip tag
Chapter 11
GOOD LABORATORY PRACTICE FEATURES
Your PIPETMAN M is fully compliant to ISO8655 standard and is CE marked (for EMC
and LDV directives).
PIPETMAN M includes the following good laboratory practice (GLP) features.
General
●
Lockable volume.
●
Volume range is printed on the push button.
●
Volume range is displayed on the screen.
●
Serial number is engraved on the body (handle) of the pipette and encoded in the
firmware.
●
Bar code: on the box and with the certificate (can be transferred).
Personalization by nametags (for marking application and/or user name), refer to
Chapter 10
on page 16.
Cycle Counters
●
From last volume setting (to count the number of cycles in the current “run”).
●
From manufacture and since the last service (refer to
Chapter 14
on page 20).
●
By indicators (R1, R2, R3 … Rx) each time pipette is readjusted.
Maintenance intervals can be specified by weeks or number of cycles elapsed.
Figure 10
Remove a tip ejector
Figure 11
Name and application tag
