GILES GBF-2-GVH Series, Operation & Service Manual

Page: 20 / 140

8
Installation GBF-2-GVH Ventless Fryer
Connect flex
conduit for
incoming
supply power
here.
1. Install properly sized circuit breakers in the appropriate facility breaker box. See Section 2.04 .
2. Recommend that a disconnect switch box be installed between main panel and Fryer (not provided) .
3. Connect 1-1/4” flexible conduit from disconnect (or breaker panel) to the Fryer. Attach conduit to rear of the
Fryer Service Box with appropriate conduit fittings. Allow enough length so that the Fryer can be moved easily
for cleaning and servicing. See Figure 2.05.1 .
4. Open Fryer doors and remove Service Box Covers. See Figure 2.05.1 .
5. Connect ground wire between the Ground Lugs and proper earth ground.
6. Route the appropriately sized conduit and supply power wiring to each of the Fryers, install conduit from rear of
units to Service Boxes in the front cabinets; attach conduit at Service Box inlet (conduit and connectors
customer provided) .
7. Pull supply power wires to front of Fryers and connect at Distribution Blocks located in the Service Boxes. See
Figure 2.05.1 .
8. Reinstall Service Box Covers.
2.05 Electrical Connections - continued
Service Box (2)
Flexible Conduit
Ground Lug
Distribution
Block: connect
supply power this
side.
2.05.1 Electrical Connections Diagram