GILES GBF-2-GVH Series, Operation & Service Manual

Page: 91 / 140

79
Operation GBF-2-GVH Ventless Fryer
5. Connect the Oil Discharge Hose
⑦
to the Discharge Coupling
⑧
on panel inside the right side cabinet (push in
on the white slip-ring while inserting brass hose fitting) . Be sure that connection is secure.
6. Place the discharge wand end of Hose into an appropriate hot oil disposal container ⑩ (Giles Oil Caddy is
depicted, not provided)
7. Set the Pump Diverter Valve
⑤
to the [DISCHARGE HOSE] position.
7
9
8. Set the Pump Switch
⑩
located on the right side Control Panel
to the [PUMP] position and allow used shortening to be pumped
into the disposal container. When all oil has been pumped out of
the Filter Pan, return the Pump Switch to [OFF] .
5
8
9. Set Power Switches
⑪
on both Panels to the [ OFF] position.
5.05 Removing Waste Cooking Oil from Fryer - continued
10
If holding the Discharge Hose during the next step, be sure the wear thermal oven mitts.
Some parts of the hose assembly can become very hot .
11
6
5
8
10. On the unit being emptied , return Drain Valve Handle
⑥
to the
[CLOSE] position.
11. Place the Pump Diverter Valve Handle
⑤
inside the right side
cabinet to the [OIL RETURN] position.
During the next step be sure the wear oven mitts. Some parts of
the Discharge Hose assembly and coupling will become very hot .
Continued on Next Page