GILES GBF-2-GVH Series, Operation & Service Manual

Page: 60 / 140

Operation GBF-2-GVH Ventless Fryer
48
Continued on Next Page
5.01.5.1 Editing a Menu Item Preset
Press the MENU
key
twice (2x)
Use numeric keypad [2] - [8]
(up/down) to scroll through list
to the desired Menu No.
Press the EDIT key to select
& display current Menu
settings.
Use numeric keypad [2] - [8] (up/down) to select item
[NAME] or [TIME] for editing.
“<-Press START” points to setting to be edited.
Press the
START key
to begin
edit
Editing [NAME] - Method 1:
Enter NAME letter by letter.
Select edit NAME as shown
on left. Flashing cursor is
positioned at 1st letter.
Use keypad [2] - [8]
(up/down) to scroll letters,
character changes at cursor
position. Stop scrolling at
desired character. Use [4] -
[6] (left/right) to move
cursor to next character
and repeat.
When finished editing
NAME , press [START]
to Save -OR- press [CLEAR] to
Cancel and Exit
without saving
+
Editing [NAME] - Method 2:
Select a NAME from Catalog of programmed names.
Select edit NAME as shown
on left. Flashing cursor is
positioned at 1st letter.
Press [0] key to open
Catalog of programmed
Names and use keypad [2] -
[8] (up/down) to scroll
through list. Press [START]
to copy a desired NAME
into the Menu Item being
edited, and return to
previous display.
If done, press [START] to
Sav e
-OR-
press [CLEAR] to Cancel and
Exit without saving -OR- [0]
to re-open catalog.
Two different methods may be used to Edit the Menu
Item Name, see instructions on the right.
Pressing [CLEAR] 2x will Exit
from Editing.