Gilera Runner Purejet 2007, Workshop Manual, Page: 50 / 257

indicator switch for the right bulbs and to the PINK
cable for the left bulbs.
See also
Legshield
level indicators
Composed of fuel level transmitter, analogical
reading instrument and fuel reserve light.
If problems occur check:
- The fuel reserve light
- The 7,5A fuse in the photograph after having re-
moved the front casing
The WHITE cable of the instrument group has a voltage of +12V
Using the current meter, the ohmic values of the fuel level transmitter moving the arm with the floater.
Limit values:
position of empty tank = 87 ÷ 97
Ω
position of ½ empty tank = 34 ÷ 42
Ω
position of full tank < 7
Ω
See also
Legshield
The oil mix warning light performs a timed check
of 3" every time the key is turned to ON. The check
is managed by the turn indicator device which ap-
plies a voltage of 12 v to the oil warning light bulb.
If on turning the key to ON the control is not carried
out check:
- Bulb efficiency
- The 7,5A fuse shown in the photograph after re-
moving the front casing.
- Using a multimeter and turning the key to ON that the 2 YELLOW cables of the oil mix command light
have a voltage of +12V
- The efficiency of the oil mix command light.
To access the oil mix command light remove the rear hold. Remember that the voltage of +12V to the
2 YELLOW cables of the oil mix command light lasts 3" from the moment the key is turned to ON.
See also
Electrical system
Runner Purejet
ELE SYS - 50