Gilera Runner Purejet 2007, Workshop Manual, Page: 107 / 257

Refitting
Lubricate the seats and the balls with the grease
recommended.
- Lock at the prescribed torque and turn the key
anticlockwise by 90° to 100°.
Specific tooling
020055Y Wrench for steering tube ring nut
Recommended products
AGIP GREASE PV2 Grease for control levers
on the engine
White anhydrous-calcium based grease to protect
roller bearings; temperature range between -20 °
C and +120 °C; NLGI 2; ISO-L-XBCIB2
Locking torques (N*m)
Locking torque:
50 to 60 Nm
Steering column
Removal
Removing upper and lower frame area
- Only remove the seats if it is strictly necessary.
- Using the special tool remove the upper fifth
wheel seat by putting the special tool into the lower
part of the headstock as indicated in the figure.
- By inserting the punch into the top of the tube,
remove the lower fifth wheel seat from the head-
stock.
Specific tooling
020004Y Punch for removing fifth wheels from
headstock
Refitting
Refitting lower and upper area on the frame
Runner Purejet
Suspensions
SUSP - 107