Keypad Programming
Using the Keypad Programming Tool
Page 42 MDE-4318D Competitive Pump and CRIND (CPC) Hardware/Software Start-up and Service Manual · May 2010
6
After programming the keypad with a valid setup, press
Set Keypad
. This will store the
customizable keypad as a file that the Passport system can use. The following message
appears, showing the status of the keypad setup.
Figure 3-7: Keypad Setup
Defined
Keypad
Notes:1) If the keypad is not programmed appropriately, a message will be displayed to
indicate that there is an issue.
2) The YES and NO keys are double-wide, and the HELP and CANCEL keys are
single-wide. If a position on the keypad does not have a button associated with it, you
can set the button to “NOT USED”.
