background image

PA0338X00X D-Box Installation

Installation Overview

Page 20

MDE-4318D Competitive Pump and CRIND (CPC) Hardware/Software Start-up and Service Manual · May 2010

Tokheim D-Box (PA0338X001)

The PA0338X001 D-Box provides an interface between the Gilbarco Passport system, 
Tokheim DPT/Tokheim Encryption Device (TED), and dispensers. Unlike the Wayne D-Box, 
the Tokheim D-Box presumes that the Tokheim dispensers are already installed. It is designed 
to connect to the Tokheim Model 69 Box (or the TED box if it is installed) for the DPTs, and 
the Model 67 Box for the dispensers.

One D-Box supports eight Tokheim pump loops (eight dual-sided dispensers for a total of 

 

16 fueling positions and 16 Tokheim DPT/TED).

Figure 2-4: Tokheim D-Box (PA0338X001)

Three 1-inch Conduit 
Knockouts are 
provided at the rear for 
Field Wiring

115 VAC Line Cord 
(Q11121-01)

230 VAC Line Cord [Q11736-02 (User to 
Supply Plug for 230 VAC)]

Dispenser Interface Boards

The PA0338X001 D-Box contains one transformer and a removable tray with two PCBs, 
T20636-G1 and T20488-G2. Each PCB contains an on-board power supply and an 

 

optically-isolated current loop interface.

Summary of Contents for VEEDER-ROOT Passport PA03338ABCD



















































































Reviews: