MDE-5387D Hybrid Card Reader S (HCRS) Kit Installation Instructions · May 2020
Page 9
Installing the HCRS Kit
3
Remove the four hexagonal-head screws that secure the card reader bracket and card reader to
the option door using a 1/4-inch nut driver or ratchet and socket. Remove and discard the
existing card reader and card reader bracket.
Note: A bracket is provided in the kit.
Figure 1: Top View of SCR
Screws (4X)
Card Reader (SCR)
Card Reader Bracket
4
Carefully remove the old card reader gasket from the option door. Use a putty knife if
required.
5
Ensure that the door surface where card reader is installed is smooth and free of debris.
Removing the existing card reader is now complete.
6
(for Encore or The Advantage Series depending on the type of the model)
on
to begin the procedure for Side B of the unit.
