background image

36

CQ-RXBT490U

English

 SiriusXM Satellite Radio Control

Operation Flow 

Connecting SiriusXM Tuner 

Connect the optional SiriusXM Connect Vehicle Tuner.
Refer to the installation instructions included with the 
SiriusXM receiver and this unit.

Getting started 

A SiriusXM subscription (sold separately) is required 
to receive programming. You can subscribe by calling 
SiriusXM listener care or by going on line - see below 
for details.

1

 Press 

[SOURCE]

 to select the SiriusXM

mode.

2

 Check the Radio ID.

¡ 

Write down the Radio ID from your SiriusXM 
Connect Vehicle Tuner.

¡

 To show the Radio ID on the display, tune to 

channel 0. (Refer to “Channel Selection”.)

Radio ID display 
(example)

2

 Activate the SiriusXM Satellite Radio by call-

ing or going on-line:

¡

 Web site: 

http://www.siriusxm.com/subscriptions

¡

 Phone number: 1-800-967-2346

Note

: The Radio ID does not use the letter I, O, S, or F.

Band selection 

Press

[BAND]

 to change the band.

Channel selection 

[

d

]

: Next available/subscribed channel

[

s

]

:  Preceding available/subscribed channel

Hold down for seek forward/reverse.

Note

: “CH LOCKD” is displayed if a channel is selected 

that has been locked by the parental lock setting, 
follow the procedure next on “Channel unlocking” to 
unlock the channel.

Channel unlocking (passcode entry)

To receive a channel locked by a parental lock, a pass-
code needs to be entered after tuning to the channel. 
(Refer to page 39 for parental lock setting.)

1

 Tune to a channel locked by a parental lock. 

 

 

2

 Enter a number for each fl ashing digit.

Turn 

[VOL]

 

: Selects number 0 to 9.

Push

[VOL]

 

: Selects next digit to be entered.

[SOURCE]

selects a source. 

[BAND]

selects a band in the SiriusXM 
source. 

[

6

] [

7

]

selects an 

available/subscribed channel.

Preset buttons [1]

 through 

[6]

select a preset channel in the SiriusXM source, preset 
the current channel (by holding it down for more than 
2 seconds).

[

{

] [

}

] (FOLDER)

skip to the previous/next category.

[VOL]

selects a menu or number 

(PUSH SEL

 :Select

)

selects items in the selection 
mode.

Summary of Contents for SiriusXM CQ-RXBT490U











Reviews: