MDE-5387D Hybrid Card Reader S (HCRS) Kit Installation Instructions · May 2020
Page 19
Appendix A: Configuring/Activating FlexPay II CRIND
The Service Menu is displayed when the FlexPay II CRIND requires activation
(see
). Otherwise, a white screen with the Gilbarco logo and software package
versions appears momentarily (see
).
Figure 15: Software Packages Screen
<1> enter setup
is displayed at start-up
2
Press
1
>
Enter
. The Service Menu is displayed.
Figure 16: Service Menu - Screen 1
3
Enter the right most six digits of the PPN and press
ENTER
/
OK
. The Service
Menu - Main Menu is displayed.
Note: If you do not enter the password within 5 minutes, the unit automatically restarts.
Figure 17: Service Menu - Main Menu
