Installing Dish
July, 2013
35
Proprietary and Confidential
Connecting Cables to Transceiver
To connect the cables to the transceiver:
1.
Screw the male F-connectors of the RF cables onto the
corresponding
female
RF-connectors of the transceiver (
Rx
to
Rx, and Tx
to
Tx
) leaving a loop of cable
(excess length) as shown in the Figure below.
Figure 27: Connecting Cables to Transceiver
Grounding Transceiver
To ground the transceiver:
1.
Connect one end of the equipotential bonding cable to the transceiver using the
screw provided, as shown in the Figure in the previous section.
