Installing and Connecting Modem
July, 2013
57
Proprietary and Confidential
Figure 47: Tightening the Nuts
Tightening the nuts, the way it is described above is not mandatory, but it is
recommended. Tightening the nuts in a different way may cause a change in the
assembly position to the extent that the actual elevation and azimuth values will
considerably differ from the nominal values.
Excessive tightening will damage the bolts, nuts, or clamps. Take care not to warp
the clamps.
6.
If the elevation offset arrow position changes after tightening the bolts, adjust the
elevation accordingly.
