Installing Dish
July, 2013
31
Proprietary and Confidential
Figure 21: Reflector Attached to Back Bracket
9.
Tighten all the nuts by hand first; complete the tightening of all the nuts with a
spanner/ratchet.
Attaching Boom Arm to Back Bracket
To attach the boom arm to the back bracket:
1.
Insert the
reflector
end of the boom arm into the back bracket all the way, until it
locks into position.
Figure 22: Inserting Boom Arm into Back Bracket
2.
Insert and tighten the four bolts (with flat and spring washers) - two at each side.
