Installing Dish
Installing Equipment
28
CPE Installation and Pointing
Proprietary and Confidential
The Az/El unit is supplied preset to 20 degrees elevation (see Figure above).
The bars of the elevation scale have a 2-degree resolution; smaller markings in
between provide a 1-degree grid.
Mounting Reflector
To mount the reflector:
1.
Verify that the back bracket rotates freely relative to the skew plate.
If the rotation is not free enough, you need to slightly release the nuts of the four
bolts holding the skew plate.
2.
Rotate the back bracket around the skew plate until the U-slot faces upward.
Figure 16: Back Bracket - U-slot
3.
Insert a bolt into the uppermost hole of the reflector from the concave side.
