GF JRG Coral force 11000, Operating Manual

Page: 21 / 68

Seite 21 von 68 Rev.: 1113803-1
6 Installation Options
JRG Coral force unit is fitted to domestic water inlet immediately after the meter, non-return
valve, filter and pressure regulator.
(1) Water meter; (2) domestic water station; (3) JRG Coral force limescale conditioner; (4) free outlet into
drain (ensure adequate dimensioning and temperature tolerance); (5) three-phase power socket; (6) cold
water dispenser with cold water risers; (7) hot water tank; (8) heat exchanger; (9) hot water dispenser with
hot water rising pipe; (10) wall-mounted mixer tap; (11) non-return valve; (12) pressure-relief valve
The diagram shown here does not include all the safety and shut-off elements
required in a professional installation; it contains only the primary components
for proper installation of the unit. Applicable standards, in particular DIN 1988
and local installation guidelines, must be observed.