GF JRG Coral force 11000, Operating Manual

Page: 16 / 68

Seite 16 von 68 Rev.: 1113803-1
The controller is operated via the 4 cursor keys (1) , the OK button (2) and the ESC button (3) ,
which are positioned to the right of the display (4) .
Nach dem Einstecken des Netzsteckers erscheint im Display der Steuerung das in der Abbildung
oben zu sehende Menü. (Anzeige bei Betrieb der Steuerung)
Status OK ... operating without
malfunctions
Error! ... fault occurred or
maintenance/granulate change
required
Bh Operating hours count since
initial commissioning or last
granulate change
T-ist Current temperature in the
system.
Tag Days on which thermal
disinfection takes place.
e.g.: M - - T - - -
Monday, Thursday
(Factory setting: Monday and
Thursday)
Zeit Start time for thermal
disinfection
(Factory setting: 00:05)
L.TD Past time since last thermal
desinfection
Anz. Number of thermal desinfections
T-min Minimum temperature during TD
T-aus Maximum temperature during TD
Hyst Heater control hysteresis (Hz + Hy
… 70+(-5)°C ) i.e. the heater keeps
the temperature between 70-
75°C.