GF JRG Coral force 11000, Operating Manual

Page: 46 / 68

Seite 46 von 68 Rev.: 1113803-1
Green operating status indicator off
Red fault lamp on
The error number E(NN)/date and time are displayed in the
main menu.
Error messages can also be read from the display. They
indicate which component of the system has issued the error.
on
open
When function or operational faults occur, the controller captures both the operating mode
current at the time (WT, TD or RS) and the components of the limescale conditioning unit
affected by the fault (e.g. ball valve KH1 etc.) and stores these in an error log.
Faults are output via the signal lamps and an acoustic alarm and also via the display. Error
messages and/or the error log can be retrieved as described below.
Deactivate/Reset Alarm:
•
To silence the alarm, press the 'Alarm Off' button. The alarm will
sound after a further 48 hours (=2 days) if the fault has still not been
rectified.
•
By holding the Alarm Off button down for 10 seconds, however, you
can disable the alarm long-term (i.e. until the next initialisation). Three
short peeps indicate that deactivation has been successful.