GF JRG Coral force 11000, Operating Manual

Page: 26 / 68

Seite 26 von 68 Rev.: 1113803-1
7.3 Fitting thermal insulation and thermometer
U
Check for Leaks
Before fitting the insulation, check installation and unit for any leaks,
including the base of the vessel.
Fit the thermal insulation:
1. Close the sealing rail on one
of the two sides of the
valves.
2. Bend the insulation sections
around the vessel and seal
on the opposite side.
3. Fit PS cover in position
4. Fit snap-in clamps at top and
bottom
5. Place PS cover over
maintenance flange