4
1 Safety precautions
Intended use
The
Slimdrive SL
and
Slimdrive SL-FR 2M
are only suitable for use
•
in dry rooms
•
in automatic door systems for horizontally moved door leaves
•
in entrances and interior areas of pedestrian traffic in commercial plants and
public areas
The
Slimdrive SL
and
Slimdrive SL-FR 2M
may not be used as a fire or smoke
protection door.
The
Slimdrive SL-FR 2M
is approved for use in escape and rescue paths.
The
Slimdrive SL
may not be used as an escape and rescue path door.
Safety precautions
The prescribed installation, maintenance and repair work must be performed by
properly trained personnel authorised by GEZE.
The country-specific laws and regulations are to be observed during safety-related
tests.
GEZE shall not be liable for injuries or damage resulting from unauthorised
modification of the equipment, and the approval for use in escape and rescue paths
is voided when unauthorised changes are made (
Slimdrive SL-FR 2M
).
GEZE is not liable if products from other manufacturers are used with GEZE
equipment.
Only original GEZE parts may be used for repair and maintenance work as well.
The connection to the power supply must be made by a qualified electrician. Perform
the power connection and equipment earth conductor test in accordance with
VDE 0100 Part 610.
Use a customer-accessible 10-A overload cut-out as the line-side disconnecting
device.
Protect the display program switch from unauthorised access.
The detection field of the motion detector in the exiting direction must satisfy the
AutSchR "Directive for automatic windows, doors and gates" (
Slimdrive SL-FR 2M
).
In accordance with Machine Directive 98/37/EC, a danger analysis must be
performed and the door system identified in accordance with the CE Identification
Directive 93/68/EEC before commissioning the door system.
Observe the latest versions of guidelines, standards and country-specific regulations,
in particular:
•
BGR 232 "Guidelines for power-operated windows, doors and gates"
•
VDE 0100, Part 610 "Installation of high-voltage systems with nominal voltages up
to 1,000 V"
•
AutSchR "Directive for automatic windows, doors and gates"
(
Slimdrive SL-FR 2M
)
•
Accident-prevention regulations, especially BGV A1 "General regulations" and
BGV A2 "Electrical systems and equipment"
•
DIN EN 60335-2-103 "Safety of electrical devices for home use and similar
purposes; Special requirements for drives for gates, doors and windows"
Safety-conscious working
Secure workplace against unauthorised entry.
Watch swinging area of long system parts.
Never carry out work with a high safety risk (e.g. installing the drive, hood or door leaf)
while alone.
Secure hood/drive shrouding against falling.
Use only cables prescribed in the interconnection diagram. Lay screening in
accordance with the connection diagram.
Secure loose, internal drive cables with cable ties.
