30
Installing hood
1. Fasten hood stay cables to the mounting elements of the runner (see
Chapter 3.16).
2. Attach cable for hood earth to the earth connector on the runner.
3. Clean hood at the contact points for hood mounting brackets. When doing so,
ensure that the hood is not lubricated at the contact points.
4. Pull the protective film off the Velcro strip on the hood mounting bracket.
5. Slide hood onto side panels until it engages and press it firmly near the hood
mounting brackets.
6. Screw in locking pin (for units with a lock).
Filling out user manual
➮
Record installed features in the user manual for the owner.
4.4
Dismantling
Removal is carried out in the reverse order of installation.
Danger of injury from swivelling hood!
➮
When handling the hood, always work together with a second person.
The lock must not scrape the hood.
The cables must not be clamped.
Danger of injury from falling hood!
Hood is held by an engaging mechanism and the Velcro strips of the hood mounting
bracket.
➮
The hood may only be removed together with a second person; let it down
carefully at the hood stay cables.
Risk of injury from height adjustment strip!
➮
Pull out the height adjustment strip before detaching the door leaf.
➮
Do not place the door leaf on the height adjustment strip.
Danger of injury due to impact and crushing!
➮
Secure the door leaves against accidental movement.
➮
Disconnect the battery.
Danger of electric shock!
➮
Disconnect the system from the 230 V mains network before working on the
electrical system.
