38
Replacing fuse in transformer
1. Insert a suitable screwdriver into the opening of the PCB cover (1) above the
switch.
2. Carefully press end wall of PCB cover upward with the tip of the screwdriver.
The snap catch is released.
3. Remove cover.
4. Pull off fuse retainer (2) toward the front and replace defective fuse.
5. Reattach fuse retainer.
6. Set PCB cover in place and snap in.
Danger of electric shock!
➮
Disconnect the system from the 230 V mains network before removing the PCB
cover.
1
2
Cables must not be pinched when replacing the PCB cover.
